Skip to main content
Skip to main content
Edge software

How to connect SIA Connect to Cloud Studio IoT

SIA Connect is an edge gateway, available as hardware or as software, that reads PLCs and industrial equipment through connectors and passes each value on through mappings. One of those connectors is MQTT. Every Cloud Studio IoT instance has its own MQTT server, with TLS on port 8883 and its own credentials, so SIA Connect publishes the values it reads to your instance and the platform turns them into dashboards, alarms and reports.

How to connect it

  1. 1

    Read the equipment

    In SIA Connect, create an instance with the connector for your equipment (Siemens S7, EtherNet/IP, Modbus, OPC UA or BACnet) and add one item for each value you want to send.

  2. 2

    Get the MQTT connection data

    In the Manager of your Cloud Studio IoT instance, open MQTT Configuration and copy the user, its password, the server and the port, usually 8883.

  3. 3

    Add the MQTT instance

    Back in SIA Connect, add an instance with the MQTT connector and enter the server, the port, TLS and the credentials from the previous step.

  4. 4

    Publish on the uplink topic

    Create an MQTT item with the topic {MQTTUserID}/uplink/{DeviceAddress} and a JSON input template that carries the item name and its value. Then map the items of your equipment to it.

  5. 5

    Create the device

    In Cloud Studio IoT, create a device model with one endpoint per value and a short script that reads the JSON, and a device whose address is the one used in the topic.

What you get

  • PLC and meter values on dashboards anyone can open in a browser or in the iOS and Android app
  • Alarms by email, SMS, WhatsApp, voice call or push when a value leaves its range
  • The same instance also takes LoRaWAN, HTTP and TCP devices, under your own brand if you are an integrator

Keep reading

Other integrations

Questions