Can I monitor pool chlorine and pH remotely?

pH, yes, with a wireless probe. Chlorine is read from your dosing controller when it has Modbus, through our edge software gateway. If the controller has no data output, we monitor pH, temperature and the plant room.

Does it replace the dosing controller?

No. The dosing controller keeps correcting the water. Monitoring adds the view of every pool, the plant room and the alerts.

Can it alert me if the filtration pump stops?

Yes. A current clamp on the pump line shows when it stops drawing current, and the alert goes by any of the five channels.

Can a maintenance company see all its pools in one place?

Yes. Every pool reports to the same platform, and the company can offer it to its clients under its own brand.

IoT Solution

Remote pool monitoring: pH, chlorine and plant room

Wireless LoRaWAN sensors for pH, water temperature, balance tank level, leaks and pumps, and the chlorine reading from your dosing controller when it has Modbus. Every pool you look after on one platform, with alerts and records.

Try Demo Contact

Measured continuously, not only at the daily check

Alert channels: email, SMS, WhatsApp, voice call and push

Platform for every pool you look after

99.9%

Platform availability, excluding scheduled maintenance

150,000+

Devices connected to the platform

Alert channels

99.9%

Platform availability

Community pools and property managers

Every community pool in the portfolio on one screen, with an alert when pH drifts or the pump stops.

Pool maintenance companies

Fewer trips to check readings, and the visit goes where something is actually wrong. Under your own brand if you want.

Hotels, campsites and municipal pools

Several pools per site, each with its plant room, followed from the office.

What you watch in each pool

Sensors from our catalog for the water and the plant room, plus the dosing controller you already have.

pH and water temperature

A pH and temperature probe in the circuit, with an alert when pH leaves the range you set.

Chlorine from your dosing controller

Dosing controllers with Modbus can be read through our edge software gateway, so their chlorine and pH readings appear on the platform.

Balance tank level

A level sensor warns when the balance tank runs low or overflows, before the pump runs dry.

Pumps and plant room

A current clamp shows whether the filtration pump is running, and a leak sensor on the plant room floor catches a burst pipe or a flood.

Records

The history of every reading, ready to export for the pool's records.

Reference sensors

Catalog devices we already integrate, with their decoder ready. For each installation we pick the model that fits best.

All LoRaWAN devices

Remote pool monitoring: what can be measured and what you need

Community and public pools must keep pH and disinfectant in range and record the checks. A dosing controller corrects the water; remote monitoring lets whoever maintains it see every pool, get an alert when something drifts and keep the records without going there.

What to monitor

pH: outside its range, chlorine loses effect and bathers notice it in their eyes and skin.
Chlorine: measured by the dosing controller's probe. If the controller has Modbus, its reading can be sent to the platform.
Water temperature: for comfort and for heated pools.
Balance tank and pumps: a low level or a stopped pump means no filtration, even if the water still looks fine.
Plant room floor: a leak or a flood next to the pumps and the chemical tanks.

Dosing controller or monitoring?

Dosing and control equipment from brands such as Idegis, AstralPool, Hayward, Bayrol or Seko measures and corrects pH and chlorine in each pool, and some of them have their own app. Monitoring does a different job: it brings every pool, from any brand, onto one platform together with the plant room, and sends the alert to whoever is on duty.

	Dosing controller	Monitoring platform
Job	Measures and corrects pH and chlorine	Watches, records and alerts
Plant room	Not covered	Pumps, level and leaks
Many pools	One app per brand	Every pool on one platform

Records and alerts

Every reading is stored with its date and time and can be exported, which helps keep the pool's control records. Alerts go by email, SMS, WhatsApp, voice call or push notification in the iOS and Android app, with thresholds per pool.

The platform runs on AWS (Frankfurt for Europe, United States for the rest of the world) or on your own servers, and maintenance companies can offer it under their own brand with the white-label option.