Configuração do ClienteDispositivos e EndpointsDispositivosIntegração de DispositivosMQTTBridge HTTP
IAS Sensors (Motion, Occupancy, and Binary Sensors)
Reporting Sensor Status
The MQTT integration of IAS sensors uses the following structure:
{
"accessToken": "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx",
"endpointID": 1,
"state": 2,
"timestamp": "2021-02-23T14:55:03",
"mqttMethod": "UpdateIASSensorStatus",
"mqttRID": "Prafw6H"
}Parameters
| Name | Description | Data Type |
|---|---|---|
| accessToken | Access token with permissions to update endpoint information. See this page for more information. | text |
| endpointID | Unique endpoint identifier or combination of device address and endpoint address in format [deviceAddress]:endpointAddress (e.g.: [device-1234]:1). These values can be found on the endpoint management page. | text |
| state | The sensor state. Possible values: 1 = inactive, the sensor detects no activity; 2 = active, the sensor detects activity; 3 = cleaning, the sensor's space is being cleaned; 4 = needs cleaning; 5 = test mode; 6 = tampered, the sensor may not be working properly; 7 = under maintenance, the sensor may not be working properly; 8 = a vehicle is entering the parking space; 9 = a vehicle is leaving the parking space; 10 = the parking space is in violation. | numeric |
| timestamp | Optional value indicating the UTC date and time corresponding to the measurement. The date format must match one of those specified in the date formats section. If the field is omitted, the platform will assume the measurement corresponds to the current date and time. | text |
| mqttMethod | Service method to call, in this case UpdateIASSensorStatus. | string |
| mqttRID | Optional request identifier, used to get a confirmation response. | string |
Reporting Status in "raw" Format
The sensor state can be reported as a raw value using the expression converter. This option is convenient when the device is unable to perform conversions and emits values that need to be transformed before being injected into the platform.
Here is an example of a request in raw format:
{
"accessToken": "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx",
"endpointID": 1,
"rawData": "2",
"timestamp": "2021-02-23T14:55:03",
"mqttMethod": "UpdateIASSensorStatusRaw",
"mqttRID": "RXmp123"
}Parameters
| Name | Description | Data Type |
|---|---|---|
| accessToken | Access token with permissions to update endpoint information. See this page for more information. | text |
| endpointID | Unique endpoint identifier, which can be found on the endpoint management page. | numeric |
| rawData | Value reported by the sensor, as text. An expression must be specified in the expression converter. The expression must return a numeric value matching one of the states in the table above. | text |
| timestamp | Optional value indicating the UTC date and time corresponding to the measurement. The date format must match one of those specified in the date formats section. If the field is omitted, the platform will assume the measurement corresponds to the current date and time. | text |
| mqttMethod | Service method to call, in this case UpdateIASSensorStatusRaw. | string |
| mqttRID | Optional request identifier, used to get a confirmation response. | string |
Última atualização em