Configuração do ClienteDispositivos e EndpointsDispositivosIntegração de DispositivosMQTTBridge HTTP
Update RSSI Status and Battery Level
Reporting a Device's RSSI Status and Battery Level
This method keeps no history: the platform only stores and shows the latest report. If a first request reports three batteries and a second one reports only one, the device is assumed to have a single battery from then on. The same applies to RSSI. Sending empty arrays means there is no battery or RSSI data, and anything reported before is cleared.
The MQTT integration of RSSI status and battery level uses the following structure:
{
"accessToken": "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx",
"deviceID": 1,
"battery": [
{
"type": 2,
"percentage": 30,
"voltage": 3.5
},
{
"type": 3,
"percentage": 100,
"voltage": 5
}
],
"rssi": [
{
"type": 2,
"quality": 100,
"strength": -40
}
],
"mqttMethod": "UpdateDeviceStatus",
"mqttRID": "tkrs34"
}More information about requests and topics in the section on MQTT integration
Parameters
| Name | Description | Data Type |
|---|---|---|
| accessToken | Access token with permissions to update endpoint information. See this page for more information. | text |
| deviceID | Unique device identifier or device address in format [deviceAddress] (e.g.: [device-1234]). These values can be found on the device management page. | number |
| battery | List with the status of each of the device's batteries. You can send one or several. The properties of this parameter are described below. | array |
| rssi | List with the status of each of the device's wireless connections. You can send one or several. The properties of this parameter are described below. | array |
| mqttMethod | Service method to call, in this case UpdateDeviceStatus. | text |
| mqttRID | Optional request identifier, used to get a confirmation response. | text |
“battery” array parameter
Each element of this array must report at least “percentage” or “voltage”. Type is required.
| Name | Description | Data Type |
|---|---|---|
| type | Type of the battery being reported. Allowed types: 0 = unknown (automatically changed to 1); 1 = default; 2 = primary; 3 = secondary; 4 = backup. A type cannot repeat within the same array. | number |
| percentage | Remaining battery percentage, as a number. | number |
| voltage | Current battery voltage, as a number. | number |
“rssi” array parameter
Each element of this array must report at least “quality” or “strength”. Type is required.
| Name | Description | Data Type |
|---|---|---|
| type | Wireless technology whose RSSI is being reported. Allowed values: 0 = unknown (automatically changed to 1); 1 = default; 2 = WiFi; 3 = LoRaWAN; 4 = cellular (2G/3G/4G/5G/Cat-M/NB-IoT, etc.); 5 = ZigBee; 6 = custom RF. A type cannot repeat within the same array. | number |
| quality | Signal quality as a number from 0 to 100. If it is omitted but “strength” is sent, it is calculated automatically. | number |
| strength | Signal strength in dBm (negative). A positive value has its sign changed. If it is omitted but “quality” is sent, it is calculated automatically. | number |
Última atualização em