Configuração do ClienteDispositivos e EndpointsDispositivosIntegração de DispositivosMQTTBridge HTTP
Generic Sensors
Reporting Generic Sensor Value
The MQTT integration of generic sensors uses the following structure:
{
"accessToken": "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx",
"endpointID": 1,
"value": 45,
"timestamp": "2021-02-23T14:55:03",
"mqttMethod": "UpdateGenericSensorStatus",
"mqttRID": "tkrs34"
}Parameters
| Name | Description | Data Type |
|---|---|---|
| accessToken | Access token with permissions to update endpoint information. See this page for more information. | text |
| endpointID | Unique endpoint identifier or combination of device address and endpoint address in format [deviceAddress]:endpointAddress (e.g.: [device-1234]:1). These values can be found on the endpoint management page. | text |
| value | Generic value. The unit of measurement depends on the configuration of the endpoint's variable type. | numeric |
| timestamp | Optional value indicating the UTC date and time corresponding to the measurement. The date format must match one of those specified in the date formats section. If the field is omitted, the platform will assume the measurement corresponds to the current date and time. | text |
| mqttMethod | Service method to call, in this case UpdateGenericSensorStatus. | string |
| mqttRID | Optional request identifier, used to get a confirmation response. | string |
Reporting Value in "raw" Format
The generic sensor value can be reported as a raw value using the expression converter. This option is convenient when the device is unable to perform conversions and emits values that need to be transformed before being injected into the platform.
Here is an example of a request in raw format:
{
"accessToken": "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx",
"endpointID": 1,
"rawData": "45",
"timestamp": "2021-02-23T14:55:03",
"mqttMethod": "UpdateGenericSensorStatusRaw",
"mqttRID": "tkrs34"
}Parameters
| Name | Description | Data Type |
|---|---|---|
| accessToken | Access token with permissions to update endpoint information. See this page for more information. | text |
| endpointID | Unique endpoint identifier, which can be found on the endpoint management page. | numeric |
| rawData | Value reported by the sensor, as text. An expression must be specified in the expression converter. The expression must return a numeric value. The unit of measurement depends on the configuration of the endpoint's variable type. | text |
| timestamp | Optional value indicating the UTC date and time corresponding to the measurement. The date format must match one of those specified in the date formats section. If the field is omitted, the platform will assume the measurement corresponds to the current date and time. | text |
| mqttMethod | Service method to call, in this case UpdateGenericSensorStatusRaw. | string |
| mqttRID | Optional request identifier, used to get a confirmation response. | string |
Última atualização em
Flow Sensors
How to send accumulated flow in liters from a flow sensor to Gear Studio over MQTT with the HTTP bridge: message structure and parameters.
Generic Flow Sensors
How to send flow readings from a generic sensor, in its variable type's unit, to Gear Studio over MQTT with the HTTP bridge: message and parameters.