Cos-Phi-Sensoren
Cos-Phi-Meldung
Die Sensorintegration für Cosinus Phi über MQTT verwendet folgende Struktur:
{
"accessToken": "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx",
"endpointID": 1,
"cosPhi": 0.96,
"timestamp": "2021-02-23T14:55:03",
"mqttMethod": "UpdateCosPhiSensorStatus",
"mqttRID": "tkrs34"
}Parameter
| Name | Description | Data Type |
|---|---|---|
| accessToken | Access token with permissions to update endpoint information. See this page for more information. | text |
| endpointID | Unique endpoint identifier or combination of device address and endpoint address in format [deviceAddress]:endpointAddress (e.g.: [device-1234]:1). These values can be found on the endpoint management page. | text |
| cosPhi | Coseno fi, en el rango de -1 a 1. | numeric |
| timestamp | Optional value indicating the UTC date and time corresponding to the measurement. The date format must match one of those specified in the date formats section. If the field is omitted, the platform will assume the measurement corresponds to the current date and time. | text |
| mqttMethod | Método correspondiente del servicio, en este caso UpdateCosPhiSensorStatus | string |
| mqttRID | Identificador opcional para la petición, en caso de que se desee obtener una respuesta de confirmación. | string |
Cos-Phi-Meldung im „raw"-Format
El coseno fi puede ser reportado como un Rohwert, mit dem Ausdruckskonverter. Diese Option ist sinnvoll, wenn das Gerät keine Konvertierungen vornehmen kann und Werte ausgibt, die transformiert werden müssen, bevor sie in die Plattform eingespeist werden.
Nachfolgend ein Beispiel einer Anfrage im raw-Format:
{
"accessToken": "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx",
"endpointID": 1,
"rawData": "0.96",
"timestamp": "2021-02-23T14:55:03",
"mqttMethod": "UpdateCosPhiSensorStatusRaw",
"mqttRID": "tkrs34"
}Parameter
| Name | Description | Data Type |
|---|---|---|
| accessToken | Access token with permissions to update endpoint information. See this page for more information. | text |
| endpointID | Unique endpoint identifier, which can be found on the endpoint management page. | numeric |
| rawData | Valor reportado por el sensor, como texto. Debe indicarse una expresión en el conversor de expresiones. La expresión debe devolver un valor numérico indicando el coseno fi, en el rango de -1 a 1. | text |
| timestamp | Optional value indicating the UTC date and time corresponding to the measurement. The date format must match one of those specified in the date formats section. If the field is omitted, the platform will assume the measurement corresponds to the current date and time. | text |
| mqttMethod | Método correspondiente del servicio, en este caso UpdateCosPhiSensorStatusRaw | string |
| mqttRID | Identificador opcional para la petición, en caso de que se desee obtener una respuesta de confirmación. | string |