KundenkonfigurationGeräte und EndpointsGeräteGeräteintegrationHTTPHTTP-APISpeicherung von Sensordaten
Scheinleistungssensoren
Scheinleistungsmeldung in VA
Die Sensorintegration für Scheinleistung über HTTP verwendet folgende Struktur:
POST /services/gear/DeviceIntegrationService.svc/UpdateApparentPowerSensorStatus HTTP/1.1
Host: gear.cloud.studio
Content-Type: application/json
{
"accessToken": "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx",
"endpointID": 1,
"apparentPowerVA": 2850.5,
"timestamp": "2021-02-23T14:55:03"
}Parameter
| Name | Description | Data Type |
|---|---|---|
| accessToken | Access token with permissions to update endpoint information. See this page for more information. | text |
| endpointID | Unique endpoint identifier or combination of device address and endpoint address in format [deviceAddress]:endpointAddress (e.g.: [device-1234]:1). These values can be found on the endpoint management page. | numeric |
| apparentPowerVA | Apparent power, expressed in VA. | numeric |
| timestamp | Optional value indicating the UTC date and time corresponding to the measurement. The date format must match one of those specified in the date formats section. If the field is omitted, the platform will assume the measurement corresponds to the current date and time. | text |
Reporting Apparent Power in "raw" Format
Apparent power can be reported as a Rohwert mit dem Ausdruckskonverter. Diese Option ist sinnvoll, wenn das Gerät keine Konvertierungen vornehmen kann und Werte ausgibt, die transformiert werden müssen, bevor sie in die Plattform eingespeist werden.
Nachfolgend ein Beispiel einer Anfrage im raw-Format:
POST /services/gear/DeviceIntegrationService.svc/UpdateApparentPowerSensorStatusRaw HTTP/1.1
Host: gear.cloud.studio
Content-Type: application/json
{
"accessToken": "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx",
"endpointID": 1,
"rawData": "2850.5",
"timestamp": "2021-02-23T14:55:03"
}Parameter
| Name | Description | Data Type |
|---|---|---|
| accessToken | Access token with permissions to update endpoint information. See this page for more information. | text |
| endpointID | Unique endpoint identifier, which can be found on the endpoint management page. | numeric |
| rawData | Value reported by the sensor, as text. An expression must be specified in the expression converter. La expresión debe devolver un valor numérico indicando la potencia aparente, expresada en VA. | text |
| timestamp | Optional value indicating the UTC date and time corresponding to the measurement. The date format must match one of those specified in the date formats section. If the field is omitted, the platform will assume the measurement corresponds to the current date and time. | text |
Zuletzt aktualisiert am